Equipment Requirements And Specifications - Lexmark MX6500e 6500e Setup Manual

IPDS Printer and Host Setup Guide Equipment Requirements And Specifications
E
QUIPMENT
This guide provides information to help you configure the host and printer to print IPDS jobs. The information in
this guide applies to the following printers and Multifunction Products (MFPs).
• Lexmark C734, C736
• Lexmark C792
• Lexmark C925
• Lexmark E460dn, E460dw, E462dtn
• Lexmark T650, T652
• Lexmark T654
• Lexmark T656dne
• Lexmark W850
• Lexmark X463de, X464de
• Lexmark X466dte, X466dtwe
• Lexmark X651de, X652de
• Lexmark X654de, X656de
• Lexmark X658de
• Lexmark X734de, X736de, X738de
• Lexmark X860de, X862de, X864de
• Lexmark X792
• Lexmark X925
• Lexmark C950
• Lexmark X950, X952, X954
• Lexmark X548
• Lexmark 6500e
• Lexmark C746, C748
• Lexmark X746, X748
Unless otherwise specified, in the rest of this guide the term "printer" covers both printers and MFPs. The term
"Card for IPDS" also refers to the "Card for IPDS and SCS/TNe".
To print IPDS jobs, the printer must have the optional Card for IPDS and SCS/TNe* or Card for IPDS installed,
a required** minimum of user memory (DRAM), and one of the following:
• Standard Network (Ethernet connection integrated into printer system board)
• MarkNet internal LAN print server (optional card providing Ethernet connection).
• Lexmark wireless internal print server.
To install the printer, determine the host, host software, and type of printer connection you will be using. Find
the appropriate chapter in the Table of Contents and follow the steps to configure the host and printer.
*Note: SCS/TNe is not supported on all printers.
R
EQUIREMENTS AND
S
PECIFICATIONS
4