Loading The Multipurpose Feeder - Lexmark MX610 Quick Reference

Loading the multipurpose feeder

Use the multipurpose feeder when printing on different paper sizes
and types or specialty media, such as card stock, transparencies, and
envelopes. You can also use it for single‑page print jobs on letterhead.
1
Open the multipurpose feeder.
a
Pull the multipurpose feeder extender.
b
Pull the extender gently so that the multipurpose feeder is fully
extended and open.
8
2
Squeeze the tab on the left width guide, and then move the guides
for the paper you are loading.
3
Prepare the paper or specialty media for loading.
•
Flex sheets of paper back and forth to loosen them, and then
fan them. Do not fold or crease the paper. Straighten the edges
on a level surface.
• Hold transparencies by the edges. Flex the stack of
transparencies back and forth to loosen them, and then fan
them. Straighten the edges on a level surface.
Note: Avoid touching the printable side of the
transparencies. Be careful not to scratch them.