Table of Contents
Advertisement
Serial Port B
This allows users to configure serial prot B by using this option.
Enabled
Enable the configuration (Default setting)
Disabled
Disable the configuration.
Base I/O address
3F8/IRQ4
Set IO address to 3F8/IRQ4.
2F8/IRQ3
Set IO address to 2F8/IRQ3. (Default setting)
3E8/IRQ4
Set IO address to 3E8/IRQ4.
2E8/IRQ3
Set IO address to 2E8/IRQ3.
COM Port Address
If this option is set to enabled, it will use a port on the motherboard to runconsole redirection
function.
Onboard serial Port A
Onboard serial Port B
Disabled
Baud Rate
This option allows user to set the specified baud rate.
Options
300, 1200, 2400, 9600, 19.2K, 38.4K, 57.6K, 115.2K.
Console Type
This option allows user to select the specified terminal type. This is defined by IEEE.
Options
Flow Control
This option provide user to enable the flow control function.
None
XON/OFF
CTS/RTS
Console Connection
This field indicates whether the console is connected directly to the system or a modem is
used to connect.
Direct
Console is connected directly to the system. (Default setting)
Use Serial Port A as the COM port address.
Use Serial Port B as the COM port address.
Disable this function. (Default setting)
VT100, VT100 8bit, PC-ANSI 7bit, VT100+, VT-UTF8
Not supported.
Software control.
Hardware control. (Default setting)
4 3
BIOS Setup
Advertisement
Table of Contents
