Connector #4; Connector #5 - CompuSTAR CM3000 Manual To Installation

Connector #4:

Pin #1: No Connection
Pin #2: Violet/White- this wire is the (-) 200mA trunk release. The
following sequence takes place each time the trunk release output is
triggered:
1. CompuStar disarms alarm and unlocks doors
2. Trunk output is triggered
Pin #3: Orange/Black- This wire provides you with the capability of
adding driver' s door priority unlock similar to factory keyless entry
systems. Please note that this feature requires more advanced
installation. Please call Technical Support for details.
Pin #4: Blue- This wire is the (+) lock output that doubles as a
(-) unlock output.
Pin #5: Blue/Black- This wire is the (-) lock output that doubles as a
(+) unlock output.
Pin #6: No Connection

Connector #5:

Pin #1: Orange- This is the Rearm wire. It provides you with a (-) pulse
when armed, after remote start and then again one second after remote
start shuts down.
Pin #2: Orange/White- This is the Disarm wire. It provides you with a
(-) pulse when disarmed and before remote start.
Pin #3: Violet- This is the Dome light Supervision wire. It provides a
(-) 200mA pulse to turn the dome light on for one minute after unlock.
Please note: This feature is not available in manual transmission mode.
Pin #4: Brown- This is the (+) siren output wire. Connect this wire
directly to the red wire on the siren.
Pin #5: White- This is the (-) 250mA horn honk output wire.
Firstech, LLC. Technical Data (CM3000)
6