Olympus Camedia C-2020Zoom Instructions Manual page 5

• Reorient or relocate the receiving antenna.
• Increase the distance between the camera and receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
Only the included RS-232C serial cable should be used to connect the
camera to a personal computer (PC).
Declaration of Conformity
Model Number: C-2020ZOOM
Trade Name: OLYMPUS
Responsible party:
Address: 2 Corporate Center Drive, Melville, New York 11747-3157
U.S.A.
Telephone number: 516-844-5000
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
WARNING
• Keep the batteries away from children.
• If a battery is swallowed, see a doctor immediately.
• Dispose of used lithium batteries promptly, in a safe manner that
complies with all applicable laws.
• The lithium battery may present the risk of fire or chemical burn if
mishandled.
• Do not recharge, disassemble, heat above 212°F (100°C) or dispose of in
a fire.
• Before use, wipe the battery clean with a dry soft cloth to assure good
contact.
• Never use metallic tweezers to hold the battery, and never short circuit
the (+) and (–) sides of the battery.
Windows ® is a registered trademark of Microsoft Corporation.
™
Macintosh is a trademark of Apple Computer Inc.
All other brand names and product names are registered.
Olympus America Inc.
5