Battery Handling - Olympus Camedia C-2020Zoom Instructions Manual

Hide thumbs Also See for Camedia C-2020Zoom:
Table of Contents

Advertisement

Do not turn the camera when it is mounted on a tripod. Turn the tripod head
instead.
Do not touch any of the camera's internal parts.
Do not use the flash for extended periods as this can cause the flash to
become excessively hot. Do not touch the flash when it is hot.
Do not improperly open or modify the camera, as it may result in a shock or
injury.

BATTERY HANDLING

This camera uses four AA NiMH batteries, AA alkaline batteries, AA
lithium batteries or AA NiCd batteries.
Performance will be limited with alkaline batteries, especially in low
temperatures. NiMH batteries are recommended.
AA manganese batteries or a CR-V3 lithium battery pack cannot be
used.
Use the batteries correctly. Incorrect use can cause fluid leakage, heat
generation, or other damage. When replacing batteries, be sure to
load them correctly.
The batteries may be temporarily disabled when exposed to cold
temperatures. Try to keep the camera and batteries warm when using
the camera in a cold environment. Batteries that are weak in cold
temperatures will be restored under normal temperatures.
Sweat, oil, etc. can prevent a battery's terminals from making
electrical contact. To avoid this, wipe both terminals before loading the
battery.
Keep spare batteries on hand when going on a long trip. New
batteries may be difficult or impossible to obtain abroad.
When using NiMH batteries or NiCd batteries, make sure to charge
them fully with the correct battery charger.
Read instructions carefully before handling NiMH batteries or NiCd
batteries.
NEVER use any battery whose body is not covered by the insulating
sheet, as it may cause a fire or injury.
Important
• "Note" indicates information you should be aware of.
• Actual product may differ slightly from that shown in illustrations.
9

Advertisement

Table of Contents
loading

Table of Contents