Table of Contents
Advertisement
Introduction
Chapter 7,
Circuits (PVCs) for the ATM interface(s) in the ATM Connections window, which
will be available if you have an HSIM-A6DP module installed in your device.
Chapter 8,
configuration windows which will be available when an HSIM-W87 is installed.
Related Manuals
The SmartSwitch 2000 User's Guide is only part of a complete document set
designed to provide comprehensive information about the features available to
you through NetSight Element Manager. Other guides which include important
information related to managing the SmartSwitch 2000 include:
User's Guide
Tools Guide
Remote Administration Tools User's Guide
Remote Monitoring (RMON) User's Guide
Alarm and Event Handling User's Guide
For more information about the capabilities of the SmartSwitch 2000, consult the
appropriate hardware documentation.
Software Conventions
The NetSight Element Manager device user interface contains a number of
elements which are common to most windows and which operate the same
regardless of which window they appear in. A brief description of some of the
most common elements appears below; note that the information provided here is
not repeated in the descriptions of specific windows and/or functions.
Using the Mouse
This document assumes you are using a Windows-compatible mouse with two
buttons; if you are using a three button mouse, you should ignore the operation of
the middle button when following procedures in this document. Procedures
within the NetSight Element Manager document set refer to these buttons as
follows:
1-6
ATM
Configuration, describes how to configure Permanent Virtual
HSIM-W87
Configuration, describes the T3, T1, and IP Priority
Related Manuals
Advertisement
Table of Contents
