Enterasys 2000 User Manual page 65

To access the Port Redirect window:
1. Click on Device in the Chassis View menu bar to display the Device menu.
2. Click Port Redirector. The Port Redirect window,
The current port mappings will be listed in this window. You may add or delete
entries from this window.
To add an entry:
1. Next to the Source Port display box click on
2. Next to the Destination Port display box click on
3. Click Add to add the redirect pair you have just configured to the list.
Managing the Hub
Figure 2-17. The Port Redirect Window
port (Port X) from the drop down list.
destination port (Port X) from the drop down list.
The new entry will now be displayed in the Current Active Entries list in this
window and the port traffic will begin to be redirected.
The SmartSwitch 2000 Chassis View
Figure 2-17, opens.
and select the desired source
and select the desired
2-45