Craftsman 917.249121 Owner's Manual page 9

ASSEMBLY
CONTAINER MOUNTING
(See Fig. 7)
No hardware required
Install one containerto left side firSt with warningto
outsideof unit.Installothercontainer to rightside.
NOTE: RIGHT CONTAINER SHOULD ALWAYS OVER-
LAP LEFT CONTAINER AT CENTER SUPPORT.
Close cover and locklatch handleover center support
tube.
COVER LATCH
HANDLE
CONTAINER
CONTAINER
HANDLE
SUPPORT
TUBE
CONTAINER
WARNING
Fig. 7
LOWER CHUTE (See Fig. 8)
Use Hardware - - GROUP "E"
Raise and holddeflectorshieldin uprightposition.
SIidebackedgeofchuteover rearcornerofmowerdeck
and pivotforward.
Align slot in lowerchute with hex bolt in mower deck
baffle and close chuteover deckopening.
Secure withwasher and wingnut.
I& AUTION:Donotremovediechargeguerd I
from mower. Raise and hold guard when
attaching lower chute and allow It to rest
on chute while In operation.
WASHER
\
\
DEFLECTOR SHIELD
MOWER DECK
BAFFLE
WING NUT HEXBOLT
Fig. 8
CHUTE LATCH ASSEMBLY
(See Fig. 9)
Use Hardware - - GROUP "F & G"
Assemblelatch pinto upper chute,as shown.
Pressweld nut intorubberlatchand assemble rubber
latchto lowerchute, as shown.
Tightenall hardwaresecurely.
#10 X 1-1/8" SCREW
WASHERS
3/16 X3/4 X 16 GA.
SPLIT
SPACER
UPPER CHUTI
ACORN NUT
#10 X 5/8"
LOWER
WASHER
3/16 X 3/4 X 16 GA.
WELD
LOCK WASHER
Fig. 9
9