Craftsman 320.66810 Operator's Manual page 3

The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols and the explanations with them deserve your careful
attention and understanding. The symbol warnings do not, by themselves,
eliminate any danger. The instructions and warnings they give are no substitutes
for proper accident-prevention measures.
_, WARNING: Be sure to read and understand all safety instructions in this
manual, including all safety-alert symbols such as "DANGER," "WARNING," and
"CAUTION," before using this Impact Wrench. Failure to follow all instructions
listed below may result in electric shock, fire, and/or serious personal injury.
SAFETY SYMBOL MEANNING
,_ DANGER: Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
,_ WARNING: Indicates a imminently hazardous situation, which, if not
avoided, could result in death or serious injury.
,_ CAUTION: Indicates an potentially hazardous situation, which, if not
avoided, may result in death or serious injury.
NOTE: (Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
,_ WARNING: To ensure safety and reliability, all repairs should be performed
by a qualified service technician at a Sears Service Center.
,_ WARNING: The operation of any power tool can result in
foreign objects being thrown into your eyes, which can result in
severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shields
and a full-face shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection that is
marked to comply with ANSI Z87.1
SAVE THESE INSTRUCTIONS
668t0 ManuaLRevised_09 0407 Page 3