Advertisement
Epson Installation
_ When the projector and switcher are communicating with each other, there will be a delay of
30 to 60 seconds when powering the projector on/off using the System 8/10 Plus.
Epson 8000/7250 Projector Connections
_
If the installation includes looping (master/slave) switchers, see Chapter 5.
If Video Loop Back is part of the installation, see pages 2-10 and 2-11.
Extron • System 8/10 P
LUS
10. Power on the projector with either the remote control or by pressing the
projector's power button.
11. Press the projector's Menu button, then select Options and enter this selection.
12. Select Mouse/Com 1, then select BNC Format RGB and enter this selection.
Use the illustration below when connecting the System 8/10 P
8000/7250 projector. Refer to Epson documentation to continue the installation.
3, 4 or 5 BNC
• User's Manual • P/N 68-424-01 Rev. D
Configuration and Connections
9-Pin
Comm
Male
"I"
Adapter
26-484-01
"I"
9-Pin
CC 50'
15-Pin HD
to an Epson
LUS
Page 5
Advertisement
