Refer to this chapter for details on shooting photos = taking photos and
playing them back, capturing photos from video and printing photos.
TakingPhotos
1 Set the mode dial to O o
2 Turn on the camcorder.
By default, photos are recorded on
the hard disk. You can also set the
memory card as the recording media
for photos ([Z_ 33).
3 Press PH@HOTOi
halfwayo
Once the focus is automatically
adjusted,
_t_ will turn green and
one or more AF frames will appear.
, When you press [_t_
on the
wireless controller, the photo is
recorded after the autofocus
is
activated and locked.
4 Press P_I
fullyo
The ACCESS indicator will flash as
the photo is being recorded.
Observe
the following
precautions
while
the ACCESS
indicator
is on or flashing.
Failing
to do so may result
in permanent
data loss,
- Do not subject
the camcorder
to
vibrations
or strong
impacts,
- Do not open the memory
card slot cover.
- Do not disconnect
the power
source
or
turn off the camcorder=
- Do not change
the position
of the mode
dial,
_
It0TES
If the subject
is not suitable
for
autofocus,
(_) turns
yellow,
Adjust
the
focus
manually
(CC] 49).
When the subiect
is too bright,
[Overexp,]
starts
flashing.
In such case,
use the optional
FS-H37U
ND filter,
61