Canon VIXIA HG21 Instruction Manual page 103

PLayback
Pressing the p{ayback button does not start playback.
- The camcorder has exceededits operational temperature (_ appears). Turn off the camcorder and let it cool
down before resuming use.
- The camcorder has fallen below its operationaltemperature ( [] appears). Turn it off and use it in a warmer
location. Makesure to avoid rapid temperature changes.
Cannot add scenes to the playlist,
- Youcannot add more than 999 scenesto the playlist. If the playlist includes scenes recordedin NIXPor F×P
mode,the maximum number of scenes in the playlist may beless than ggg_
- Youmay not be able to add scenes to the playlist if they were recorded or edited using another device.
Cannot delete a scene.
- Youmay not be able to delete scenes recorded or edited using another device.
Deleting scenes takes longer than usual,
- Whenthe media contains a large number of scenes, some operations may take longer than usual. Back up
your recordings (LZ3 82) and initialize the recording media (C[_ 33).
Cannot delete a photo,
- The photo is protected. Removethe protection (l_ 70).
indicatorsand Onscreen DispLays
lights up in red.
- Batten/pack is exhausted. Replaceor charge the battery pack (_ 23).
appears on the screen.
- The camcorder cannot communicate with the battery pack attached so the remaining battery time cannot be
displayed.
lights up in red.
- A memory card error occurred. Turn off the camcorder. Removeand reinsert the memory card. Initializethe
memory card (1_ 33} if the display does not changeback to normal.
- The memorycard is full Replacethe memorycard or delete some recordings([_[_ 44, 65)to free somespace
on the memorycard.
[:_] lights up in red.
- The camcorder has exceeded its operational temperature. This is not a malfunction. Turn off the camcorder
and let it cool down before resuming use.
'_ flashes in red on the screen.
- The camcorder has malfuncfloned. Consult a CanonService Center.
Evenafter stopping recording, the ACCESSindicator does not go off.
- The scene is being recordedon the hard disk/memory card. This is not a malfunction.
The camcorder is on and the ACCESSindictor has been on or flashing longer than usual.
- This is not a malfunction. The camcorder may be recovering data onthe hard disk. Do not disconnect the
power source or turn oft the camcorder.
103