Canon VIXIA HG21 Instruction Manual page 110

Add t tit a n oitrat tt_
Error writing on the memory card. Data may be recovered if the memory card has not been removed.
Atiempt recovering the data?
- This message wil! appear the next time youturn onthe camcorder if power supply was accidentally
interruptedwhile the camcorder was writing on the memorycard. Select [Yes]to try to recover the recordings.
if you removed the memorycard and used it with another device after this happened,we recommendyou
select [No].
File name error
- The folder and file numbers have reachedtheir maximum value. Set [-__,] C } [Photo Numbering]to [Reset]
([_ 98) and delete all the photoson the memory card ([_] 65[ or initialize it ([_3 33).
Function not available in _ mode
- Youpressed a button that cannot be used in _ mode (while the _ button's blue light is on[. Press
the ! button to set the camcorder to flexible recording mode.
HDD error
- There is a problem with the hard disk. Initializethe hard disk (_ 33).
HDD is full
- The hard disk is full ("/_ END" appearson the screen[. Delete some recordings (_ 44, 65) to free some
space.
Initialize only using the camcorder
- There is a problem with the fib system that preventsaccessing the selected media, initialize the recording
media with this camcorder (_ 33).
May not be possible to record movies on this memory card
- Youmay not be able to record movies on a memory card without a Speed Class rating. Replacethe memory
card with one rated Speed Class2 or higher.
Memory card cover is open
- After inserting a memorycard, close the memory card slot cover (@ 32).
Memory card is fuii
- The memory card is full. Delete some recordings (8].3 44, 65) to free some space or replacethe memory
card.
Memory card is writeoprotected
- The LOCKswitch on an SD or SOHCmemory card is set to prevent accidental erasure.Changethe position of
the LOCK switch (I]_I[]119).
Memory card Number of scenes already at maximum
- The memory cardalready contains the maximum number of scenes;no further scenes can be copiedonto the
memory card. Deletesome recordings (_ 44, 65) to free some space.
Memory card Unabb to recognize the data
- The memory card contains scenes recorded in a different television system (PALor SECAM).
Need to recover fibs from the memory card. Change the position of the LOCKswitch on the memory card.
- This message will appear the next time youturn onthe camcorder if power supply was accidentally
interruptedwhile the camcorder was writing on the memory card and later the position of the card's LOCK
switch was changed to prevent erasure. Changethe position of the LOCKswitch (81]3119}.
110