Canon VIXIA HG21 Instruction Manual page 106

Add t tit a n oitrat tt_
The camcorder is connected using the optional BTCqO0 HDMI Cable, but there is no picture or sound from the
HDTV.
- Disconnectthe BTCdO0 HDMICableand then restorethe connection or turn the camcorder off and then on
again.
The camcorder is connected using the optional BTC-IO0 HDMI Cable, but HDIVlI-CEC does not work (cannot
play back using the TV's remote control),
- Disconnectthe BTCqO0 SDMIcable and turn off the camcorder and the TV. A fter a shod while turn them on
again and restorethe connection.
- If_i (_) [Control for SDMI]is set to [Oft]. Set it to [On] (_ 98}.
- HDMPCEC is not activated on the connectedTV.Activate this function on the TV.
- Evenwith TVsets compatible with SDMPCEC the range of functions availabb differs dependingon the type of
TV. Referto the instruction manualof the connectedXI.
The computer doesn't recognize the camcorder even though the camcorder is connected correctly,.
- r_l or _ (}?_[uss connection Type] is set to [DVDBurner]. Set it to [Computer/Printer]or to [Connect and
Set](_ 95).
- Disconnectthe USBcable and torn off the camcorder.Affer a sho_twhile, torn it on again and restore the
connection.
- Connectthe camcorder to a different USS port onthe computer.
The printer is not working even though the camcorder and printer ate connected correctly,
- r_ or E1 C) [uss connection Type] is set to [DVDBurner]. Set it to [Computer/Printer]or to [Connect and
Set](_ 9S).
- Disconnectthe USBcable and turn off the printer. After a short while turn it on again and restore the
connection.
The camcorder doesn't recognize the DW-IO0 DVDBurner even though it is connected correctly;
- r_ or [_ (_ [uss connection Type] is set to [Computer/Printer].Set it to [DVDBurner] or to [Connect and
Set](_ 95).
106