Canon VIXIA HG21 Instruction Manual page 114

Add t t:t a n oitrat t:_
Hardware error
- Cancelprinting. Turn off the printer and turn it back on. Check the printer status. If the printer is equippedwith
a battery, it might be exhausted. In such case, turn off the printer, replacethe battery and turn it back on.
incompatible paper size
- The paper settings of the camcorder conflict with the printer's settings.
ink absorber full
- Select[Continue] to resume printing. Consult a CanonService Center(refer to the list included with the
printer) to replacethe ink absorber.
Ink error
- There is a problem with the ink. Replace the ink cartridge.
Low ink level
- The ink cartridge needs to be replaced soon.Select [Continue] to restart printing.
No _ print orders have been set
- Nophotos havebeen marked with a print order.
No ink
- The ink cartridge is not inserted or is out of ink.
No paper
- Paperis not correctly inserted or there is no paper.
Paper error
- There is a problem with the paper. The paper is not correctly loadedor the paper size is wrong. Alternatively,
if the paper output tray is closed, open it to print.
Paper jam
- The paper jammed during printing. Select [Stop)to cancel printing. After removing the paper,set somepaper
again and retry printing.
Paper lever error
- Paperlever error occurred.Adjust the paper sebction lever to the proper position.
X photos could not be printed
- Youattempted to use the print order settings to print X photosthat were recordedwith another camcorder,
with a different compression or were edited on a computer.
Print bead not installed
- Noprint head is installed in the printer or the print head is defective.
6$Print order error
- Youattempted to set morethan gg8 photos in the print order.
Printer cover open
- Closethe printer cover securely.
Printer error
- A malfunction has occurred that may require repairs. (CanonPIXMAprinters: the printer's green power lamp
and orangeerror lamp flash alternately.)
- Disconnectthe USBcane and turn off the printer. Unplug the printer's power cord from the power outlet and
contact the appropriate customersupport center or service center.
114