Canon PowerShot SD4500 IS Digital ELPH User Manual page 77

The white balance (WB) function sets the optimal white balance for natural
looking colors to match the shooting condkions.
.... ::!ii!iiiiii!i !
Choose the white balance function.
After pressing the @ button, press the
A'_ buttons or turn the i_:i dial to choose
J_WB, then press the @ button again.
Choose an option,
Press the ,_T buttons or turn the _*_. dial to
choose an option, then press the -_'_ button.
The setting will appear on the screen.
Automaticaiiy sets the op{irnai whi{e baiance for the shooting
AWBAuto conditions.
ell Cloudy Cloudy, shady, twilight conditions
_6_ Tungsten Tungsten, bulb-type (3-wavelength) fluorescent lighting
Fluorescent Warm-white fluorescent, coot-white fluorescent, warm-white-type
,_, (3-wavelength) fluorescent lighting
Custom Manuatlysets a customwhite batance.
Custo_ White BaEance
You can adjust the white balance to the light source at the shooting location.
Make sure that you set the white balance under the light source of the actual
scene you will shoot.
In Step 2 above, choose _,_
Make sure the entire screen is filled with a
plain, white colored subiect, then press the
MENU
button.
The tint on the screen will change when a
white balance data is set.
77