Canon PowerShot SD4500 IS Digital ELPH User Manual page 12

Safety Precautions
Do not aim the camera at bright light sources (the sun, etc.).
Doing so may damage the image sensor.
dust or sand to enter the camera.
This may cause the camera to malfunction.
This is due to the high intensity of the flash burning dust and foreign materials stuck
to the front of the uniL Please use a cotton swab to remove dirt, dust or other
foreign matter from the flash to prevent heat build=up and damage to the unit.
If the battery is left inside the camera, damage caused by leakage may occur.
Contacting other metal materials may lead to fire or explosions.
when you are not using it.
Do not place anything, such as e_oth on top of the battery charger while it is
charging.
Leaving the unit plugged in for aiong period of time may cause it to overheat and
distort, resulting in fire.
Pets biting the battery could cause leakage, overheating or explosion, resulting in
fire or damage.
Doing so may cause malfunctions or damage the screen.
contact with the eereen.
Do not attach accessories to the strap.
Doing so may cause malfunctions or damage the screen.
12