Canon PowerShot SD4500 IS Digital ELPH User Manual page 72

You can choose the settings for various functions to suit your preferences.
AE stands for Auto Exposure.
The focusing range is approximately 5 cm (20 in.) - infinity at maximum wide
angle ([]), and approximately 1 m (3_3 fL) - infinity at maximum telephoto
(E_]).
EnterP mode.
Follow Steps 1 - 2 on p. 61 to choose
P.
Adjust the settings according to
your purposes (pp. 73 - 81).
shoot.
If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value are shown in orange. Try the
following settings to obtain the correct exposure.
Turn on the flash (p. 73)
Choose a higher ISO speed (p. 76)
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of o2 to +2_
Enter Exposure Compensation mode.
After pressing the _ button, press the
,_v buttons or turn the '_i_ dial to choose
±0, then press the _ button again.
::::Adjusttheb, ghtness.
While watching the screen, press the ,_v
buttons or turn the _ii_ dia! to adjust the
brightness, then press the @button.
The exposure compensation amount will
appear on the screen.
72