Canon EOS-1DS MARK III Instruction Manual page 32

Preparing to Print
PJaybaek the image.
@ Pressthe <[_> button.
_y,, T he image will appear, and the <_(>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
@
The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct
When connecting the camera to the printer, ao not use any caD_e o[ner
than the interface cable provided.
if there is a long beeping sound in step 5. it indicates a proBlem wLth the
PictBr dge pnnter. To find out what's wrong, do the following:
Press the < [_ > button to p_ayback the image and follow the steps
oelow.
1. Press <_>.
2. Qn the print setting screen, select [Print].
The error message will be displayed on the LCD monitor (p. 146).
_** If you Jse a battery to power the camera, make sure _t _s fully chargea.
With a fully cna-ged battery, printing up to about 7 hours is possible.
Before disconnecting the cable, turn off the camera and printer first. Pull
out me caole while holding the plug, not me cora.
For direct prmung, using AC Adapter Kit ACK-E4 to power the camera is
recommenaea.
139