Rack Accessories - Bosch SGE63E15UC/01 Operating Instructions Manual

Rack Accessories
Figure 6
Flip Tines
The racks consist of tines that can be folded down depending on what you
may need to load in the rack. To fold down, grasp the folding tine and
release from notch. Push folding tine downward to desired position as
shown in Figure 6.
Extra Tall Item Sprinkler (model dependent)
If an item is too tall to be placed in the bottom rack even with the top rack
in the raised position, remove the empty top rack by pulling it out of the
dishwasher until it stops. Pull the front of the rack upward and outward
until the rollers are completely free of the roller guides.
Set the top rack aside. Push the roller guides back into the dishwasher.
Insert the Extra Tall Item Sprinkler into the top rack spray outlet and turn
the sprinkler clockwise to lock into position. See Figure 7.
Note: Keep the vent on the tub's right side clear by placing tall items such as
plastic cutting boards and tall baking sheets on the bottom rack's left side or
center.
To avoid dishwasher damage, do not reinstall the top rack without removing
the Extra Tall Item Sprinkler.
Plastic Item Clips
Light-weight plastic accessories (cups, lids, etc.) can be held securely by
the plastic item clips. See Figure 8.
Figure 7
Figure 8
3-Step RackMatic ® (model dependent)
The height of the upper rack can be adjusted in 3 steps to create more space.
1 Pull the top rack out of the dishwasher until it stops.
2 To lower the rack, push the lever inward then upward.
3 To raise the rack, hold the basket on the sides of the upper rack and lift
up.
Note: Before pushing the top rack into the dishwasher, ensure the rack height
is the same on both sides. If the height is not the same on both sides, the dish-
washer door will not shut and the top rack spray arm will not connect to the
water inlet.
Figure 9
10