Before Set-Up; For Appliance Usage - Bosch PCK755UC Operating Instructions Manual

ib... iiii_ qiiiiiiiiiii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_
Before the first
start-up
Remove the packaging from the appliance
and dispose of it as per local laws. Remember
that there are other accessories in addition to
packaging materials. Keep packaging materials
and plastic bags out of the reach of children.
Check the condition of the appliance before
installing it, to ensure that it has suffered no
damage during transport.
Only authorized technical personnel must
install and connect the appliance before
its first start-up in compliance with the
regulations of the gas supplier companies and
local.
Turn the control dials to • before connecting
the appliance to the current supply.
The appliance's serial number is indicated on
the control slip annexed to this manual. For
warranty purposes, keep this note together
with the usage and assembly instructions.
Carefully read the assembly and usage
instructions before starting up the appliance.
Thoroughly clean the appliance and
accessories when using them for the first time.
This will eliminate any "new" scents and any
remaining dirtiness (see cleaning and care
chapter).
For appliance usage
The use of this gas burning appliance produces
a formation of heat and humidity in the area
of use. Make sure that the area has proper
ventilation conditions.
Keep the ventilation channels open.
Prolonged use of the appliance with several
or all cooking units may require additional
ventilation, such as opening a window or a
door or more intensive extraction of air with
an extraction hood.
To guarantee good combustion, the
room in which the appliance is installed
must have a minimum volume of 1240 eft
(35 m 3)
and must possess a door that
opens outdoors or a window that can
opened.
The use of spit-roasters, pans or grilling
stones simultaneously by more than one
burner is prohibited, as the accumulation of
heat could damage the appliance.
If large pots are used, a minimum separation
of approximately 50 mm (2") should be kept
between the pot and peripheral inflammable
materials. A minimum separation of some
50 mm (2") should be kept between the
control dial or control panel and the pot or
pan. The cooking pot must not touch
the control panel.
If pots or pan s are removed temporarily,
set the stovetop to the minimum setting.
This will reduce the risk of suffering burns
while working near open flames; in addition
to saving gas, thus favoring the environment.
If there is a fault in the current supply, do
not use the appliance.
If the appliance does not work properly,
contact the technical service.
BURNER
Triple-flame burner
Rapid burner
Semi-rapid
Auxiliary
g MINIMUM P AN SIZE g MAXIMUM P ANSIZE
_> 9"
9" 10"
6" 8"
5" 6"
9