Using Your Uds655 - Uniden UDS655 Owner's Manual

The UDS655 can record in QUAD mode (all 4 channels recorded simultaneously), with each
•
channel in 320 x 240 resolution. If only one camera is turned on (Camera Setup), then the
UDS655 records that camera in full screen (640 x 480).
Press and hold PoWer for 1 second to turn on the system.
•
Press and hold PoWer for 2 seconds to turn off the system.
•

usInG Your uDs655

To...
Change from quad view to
single view (or back)
Manually start recording
Set up to record
automatically
Manually stop/cancel
recording in Manual or
Motion mode
Manually cancel a
Scheduled Record
(either future recording or
currently recording)
14
Do This
With the screen in quad view, press
in full view mode. Once all cameras have displayed, the next press
takes you back to quad mode.
reC/DeL
Press button. Refer to RecoRdeR Setup, page 22, for
details.
Refer to RecoRdeR Setup, page 22, for details.
reC/DeL
Press .
Because this recording block has been pre-set to record for a specific
amount of time, you must reset that recording block from Schedule to
Manual or Motion Detect.
Press after the recording has been going for 15 seconds and
REC/DEL
quickly (within 5 seconds) press
Go to RECORDER SETUP/RECORD SChEDULE and press
X : MANUAL and press
the recording in progress' time frame. Press
selected.
Press to back out of the screens.
ESC
Refer to RECORDER SETUP, page 22, for details.
Ch+ Ch-
or
. The main menu displays.
M
again. Navigate to the block containing
M
until X : MANUAL is
M
to cycle your cameras
. Select
M