PLC-XC50/55 Expand Serial Command Functional Specifications
8.10.18
CF_FILTIMER Command
Command
"CF_FILTIMER_%1"[CR]
"400" -------------------- Set 400 hours
"700" -------------------- Set 700 hours
%1
"1000" ------------------- Set 1000 hours
"OFF" ------------------- No warning display
Details
Set timer of Warning display of Filter cleaning and Filter replacement
Acceptable
Response
Unacceptable
8.10.19
CF_FILCTL Command
Command
"CF_FILCTL_%1[CR]
%1
"ROLL" --------------- Scroll the filter.
Details
Reset Filter Scroll counter
Acceptable
Response
Unacceptable
8.10.20
CF_FILSCRL Command
Command
"CF_FILSCRL_%1[CR]
%1
"RST" ---------------Reset Scroll counter
Details
Reset Filter Scroll counter
Acceptable
Response
Unacceptable
8.10.21
CF_RCODE Command
Command
"CF_RCODE_%1"[CR]
"001" --------------------------- Select Code1
"002" --------------------------- Select Code2
"UP" --------------- Switch Code setting of Remote Control in positive order
%1
"DN" --------------- Switch Code setting of Remote Control in negative order
Select Code of Remote Control
The status set by this command is stored in EEPROM and its setting is effective
Details
after ALL is OFF
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
8.10.22
CF_KEYDIS Command
Command
"CF_KEYDIS_%1"[CR]
"NONE" ----------------------- RC & Projector keys are valid (All are valid)
%1
"RC" ---------------------------- RC keys are invalid
"KEY" -------------------------- Projector keys are invalid
Disable RC/Projector keys
Details
This command is available in normal Power ON status.
Acceptable
Response
Unacceptable
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
(Code1 → Code2 → Code1 0û 0 û
(Code2 → Code1 → Code2 0û 0 û )
"000"[CR]
"Error Code"[CR]
"000"[CR]
"Error Code"[CR]
)
38/67