Computer 1 Scart Command; Computer 1 Component Command; Auto Pc Adj. Command - Sanyo PLC-XC56 - 3100 Manual

PLC-XC56 Basic Serial Command Specifications

6.52. Computer 1 Scart Command

Command "C51" [CR]
Select Scart input in Computer 1
Detail Although projector returns "OK", Input search is not executed with this command
while Input search is set to On1 or On2,
Acceptable
Response
Unacceptable

6.53. Computer 1 Component Command

Command "C54" [CR]
Select Component input in Computer 1.
Detail Although projector returns "OK", Input search is not executed with this command
while Input search is set to On1 or On2,
Acceptable
Response
Unacceptable
6.54. Computer 2 DVI (PC Digital) Command
Command "C5B" [CR]
Select DVI (PC Digital) of Computer2 Input
Detail Note) Although projector returns "OK", Input search is not executed with this
command while Input search is set to On1 or On2,
Acceptable
Response
Unacceptable
6.55. Computer 2 DVI (AV HDCP) Command
Command "C5C" [CR]
Select DVI (AV HDCP) of Computer2 Input
Detail Note) Although projector returns "OK", Input search is not executed with this
command while Input search is set to On1 or On2,
Acceptable
Response
Unacceptable

6.56. AUTO PC ADJ. Command

Command "C89" [CR]
Execute Auto PC Adj. function.
This command operates the same as "AUTO PC ADJ." of main menu.
Detail
Projector suspends Auto PC Adj. operation when receiving this command another
time.
Acceptable
Response
Unacceptable
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
[ACK] [CR]
"ÿ "[CR]
18/23