NEC NP-PX700W Command Manual page 52

Function:
This command controls the freeze.
Command:
01H 98H 00H 00H 01H DATA01 CKS
Operation types
DATA01: 00H : Reserved
01H : Freeze start
02H : Freeze cancel
Response: At the time of a success
21H 98H ID *0H 01H DATA01 CKS
Data Portion Contents
-------------------------------------------------------------------
DATA01 Results
00H : Normal
01H : Error
Response: At the time of a failure
A1H 98H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2)
097-196.WXGA MODE SETTING REQUEST
**********************************************************************
Function:
This command acquires the setting of the WXGA Mode of projector.
Command:
03H B0H 00H 00H 01H C3H 77H
Response: At the time of a success
23H B0H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2)
Data Portion Contents
-----------------------------------------------------------------
DATA01 C3H fixed
DATA02 Setting Value
00H : OFF
01H : ON
Response: At the time of a failure
A3H B0H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2) (*4)
097-198. PIP/SIDE BY SIDE REQUEST
**********************************************************************
Function:
This command acquires the setting of the PIP/SIDE BY SIDE of projector.
Command:
03H B0H 00H 00H 02H DATA01 DATA02 CKS
(*4) (*3)
(*3)
(*3)