NEC NP-PX700W Command Manual page 51

078-5. MODEL NAME REQUEST
**********************************************************************
Function:
This command acquires the model name of the projector.
Command:
00H 85H 00H 00H 01H 04H 8AH
Response: At the time of a success
20H 85H 01H xxH 20H DATA01 .. DATA32 CKS
(*1) (*2)
Data Portion Contents
-------------------------------------------------------------------
DATA01 .. 32 Model name (NULL termination character string)
Response: At the time of a failure
A0H 85H 01H xxH 02H DATA01 DATA02 CKS
(*1) (*2)
======================================================================
6. Table of Response Error Codes
DATA01 DATA02
Error
Error types
descriptio
00H 00H
00H 01H
01H 00H
01H 01H
01H 02H
02H 00H
02H 02H
02H 03H
02H 04H
02H 06H
02H 07H
02H 08H
02H 09H
02H 0AH
02H 0CH
02H 0DH
02H 0EH
02H 0FH
03H 00H
03H 01H
03H 02H
[079. FREEZE CONTROL]
**********************************************************************
(*4)
Error contents
Unknown command
The current model does not support
this function.
Unvalid values specified.
Specified terminal is unavailable or
cannot be selected.
Selected language is not available.
Available memory reservation error
Operating memory
Setting not possible
On Forced on-screen mute mode
Displaying a signal other than PC
Viewer
-No signal-
Displaying a test pattern or PC Card
files screen.
No PC card is inserted
Memory operation failed
Displaying the Entry List
Power Off inhibited
Execution error
No operation authority
Specified gain number is wrong
Selected gain is not available.
Adjustment failed
(*3)
(*3)