Table of Contents
Advertisement
Storing Channels in Memory Automatically
First, select the broadcast source as
1
described on the previous page.
With the Setup menu on screen,
press CH
to select "Auto Prog."
Press VOL +. The TV will begin
2
memorizing all of the available
station. This takes about two
minutes. Press VOL + at any time to
interrupt the memorization process.
Adding and Erasing Channels
Use the number buttons to select the
1
channel you want to add or erase.
To add a channel, select it and
2
press the ADD button on the remote
control. The channel will be added
to the TV's memory and the word
"Add" will appear in the corner of
the screen.
To erase a channel, select it and
3
then press the ERASE button on the
remote control. The word "Erase"
will appear in the corner of the
screen. You can still view a channel
that has been erased from memory
by using the number buttons on the
remote control to select the channel
directly.
Auto Program
HRC 9
+ - : Stop
27
Advertisement
Chapters
Table of Contents
