Web Based Management
‧
Web-based GUI Configuration / Management
‧
Command-line Interpreter (CLI)
‧
Telnet Remote Management
‧
Firmware upgrade via FTP / TFTP
‧
Support SNMP V.1 and V.2C
‧
Built-in Diagnostic tool and IP Ping
‧
TR-069, CPE WAN Management Protocol
Interface
‧
Four RJ45 ports compatible with IEEE 802.3/802.3u, 10/100Mbps auto
selection
‧
One RJ11 port for ADSL connection
‧
One power switch button
‧
One reset button for restoration of factory default setting
LED Indicators
‧
Power, LAN, ADSL, LANx4
Antenna
‧
One external antenna
Wireless Frequency
‧
2.400~2.4835 Ghz
Receiver Security
‧
IEEE 802.11b: -84 dBm (typical), IEEE 802.11g: -60 dBm (Typical)
Transmit Output Power
‧
11b : 19±1 dBm, 11g : 15±1 dBm
Power Adapter
‧
Power Adapter: Input 110 ± 10 or 230 ± 10 VAC, Output 12VAC 1000mA
Dimensions (approximate)
160 mm (Length) x 130 mm (Width) x 24 mm (Height)
Net Weight (approximate)
‧
320g
Operating Temperature
‧
0°C ~ 45°C
Humidity
‧
5% ~ 95% (Non condensing)
Need help?
Do you have a question about the ENDSL-A2+WIG2 and is the answer not in the manual?
Questions and answers