Table of Contents
Advertisement
E
M
375 SAN S
MULEX
ODEL
TORAGE
U
'
G
SER
S
UIDE
A
A
PPENDIX
S
S
WITCH
PECIFICATIONS
Specification
Number of Ports
Operating Rate
Port Media Type
Enclosure
Management Interface
Operating Mode
Configurability
Power On Selftest (POST)
Dimensions
AC Power Input
AC Power Connector
Weight
O
C
PERATING
ONDITIONS
The switch must be operated in a clean, dry environment with unrestricted airflow. Air flows in through
the cosmetic end and out through the business end (sometimes called the transceiver end or
"back-of-box").
To avoid overheating, maintain a minimum clearance of two inches (50.8 millimeters) on each end of the
switch (the cosmetic end and the business end). Allow an adequate amount of space on the top and
sides of the switch for proper air ventilation. Do not place the switch on heat-generating surfaces.
Operating conditions are listed below.
Requirement
Operating Temperature
Storage
Power
S
WITCH
Specifications
Value
20
All ports operate at 1.0625 or 2.125 Gbps (selectable)
SFP
1U full-rack form-factor
RS-232 or 10/100 Ethernet
Switching or Non-switching modes
Management interface configurable
Yes
17.20" x 1.57" x 17.50" (W x H x D)
50 or 60 Hz / 100 – 250 VAC / 1.0 – 0.5 A
IEC connector
Approximately 18 lbs.
Value
0°C to 40°C normal operation (ambient air temperature)
-40°C to 80°C non-condensing
50 or 60 Hz / 100 – 250 VAC / 1.0 – 0.5 A
E
C
MULEX
ORPORATION
P
N
00041392-002 R
ART
UMBER
A
PPENDIX
. B
EV
A: S
PECIFICATIONS
64
Advertisement
Table of Contents
