Table of Contents
Advertisement
E
M
375 SAN S
MULEX
ODEL
TORAGE
U
'
G
SER
S
UIDE
S
I
WITCH
NSTALLATION
The switch can be installed in a rack or placed on a desktop.
Rack Installation
Installing the switch in an equipment rack requires an optional rack mount kit (sold separately). There
are two kit variations currently available:
•
24-inch Full Rack Mount Kit (Part Number 00651382), which supports equipment rack depths
from 24 to 29.75 inches.
•
30-inch Full Rack Mount Kit (Part Number 00651383), which supports equipment rack depths
from 30 to 36 inches.
The rack mount kit includes all the necessary hardware and installation instructions for properly
installing a switch into an equipment rack. Contact a sales representative for more information or
assistance in purchasing a kit.
UL Guidelines for Mounting Equipment in a Rack
When installing equipment in a rack, give careful consideration to the following factors:
•
The operating ambient temperature of rack-mounted equipment must not exceed the maximum
rated ambient temperature, which is indicated in this installation guide. (See
Conditions" on page
•
The air flow clearances specified in this installation guide must be maintained within the rack.
(See
"Operating Conditions" on page
•
The AC supply circuit for rack-mounted equipment must be capable of supplying the total current
specified on all the labels of the rack-mounted equipment.
•
All AC power supply connections must be properly earthed. To ensure the integrity of the earth
connection, special attention must be given to connections that are not directly connected to the
branch circuit (for example, power strips).
•
The rack-mounting hardware has been carefully selected to properly support the equipment.
Any alternate rack-mounting hardware must provide equal or superior support.
Desktop Installation
To place the switch on a desktop:
1. Turn the switch upside down so the case bottom is facing up.
2. Install a self-adhesive pad (included) on each corner of the switch bottom approximately 1 inch
from each side (prevents surface damage).
3. Turn the switch right-side up so the case bottom is facing down and place the switch on a stable
table or platform.
Note: Important safety, electromagnetic compatibility, and regulatory information is
contained in the Safety & Regulatory Guide . The installation and use of this product
must be in accordance with the information given in that guide.
For information on environmental requirements, see
S
WITCH
64.)
64.)
E
C
MULEX
ORPORATION
P
N
00041392-002 R
ART
UMBER
C
HAPTER
"Operating Conditions" on page
. B
EV
2: S
I
WITCH
NSTALLATION
"Operating
64.
7
Advertisement
Table of Contents
