E
M
375 SAN S
MULEX
ODEL
TORAGE
U
'
G
SER
S
UIDE
Switch Information
Current status is provided for the following items.
Item
Switch Status
SOC Status
Enclosure Temperature
Fan #1
Fan #2
Power Supply #1
Power Supply #2
S
WITCH
Status Indicators
• OK (green)–the switch unit is operating normally.
• Fault (red)–one or more of the ports has failed, the internal
temperature has exceeded acceptable levels, or another error has
occurred. Errors appear in the event log. The switch will continue to
operate; however, functionality may be impaired depending on the
event that triggered the error. Regardless of the cause, the switch
requires immediate attention.
• OK (green)–the switch chipset is operating normally.
• Fault (red)–the switch chipset's selftest has failed.
• OK (green)–the switch temperature is within the normal operating
range.
• OverTemp (red)–the enclosure temperature has exceeded the
recommended operating range.
• OK (green)–the fan unit is working properly.
• Not Present (yellow)–the power supply/fan module has been
removed.
• Fault (red)–the fan unit has stopped operating. Verify that the power
supply/fan module is properly seated in the switch.
• OK (green)–the fan unit is working properly.
• Not Present (yellow)–the power supply/fan module has been
removed.
• Fault (red)–the fan unit has stopped operating. Verify that the power
supply/fan module is properly seated in the switch.
• OK (green)–the power supply unit is working properly.
• Not Present (yellow)–the power supply/fan module has been
removed.
• Fault (red)–the power supply unit has stopped operating. Verify that
the power supply/fan module is properly seated in the switch.
• OK (green)–the power supply unit is working properly.
• Not Present (yellow)–the power supply/fan module has been
removed.
• Fault (red)–the power supply unit has stopped operating. Verify that
the power supply/fan module is properly seated in the switch.
E
C
MULEX
ORPORATION
P
N
00041392-002 R
ART
UMBER
C
3: S
HAPTER
WITCH
. B
EV
M
ANAGEMENT
50