E
M
375 SAN S
MULEX
ODEL
TORAGE
U
'
G
SER
S
UIDE
Viewing Port Utilization
Port utilization measures the amount of traffic passing through a port over a period of time. For example,
if an initiator is transmitting data to a target, the initiator port displays a port utilization value (%) while the
target port does not. If the same initiator is receiving data from the target, the target port displays a port
utilization value (%) while the initiator port displays does not.
The Port Utilization page displays each port's utilization percentage based on high, average, and low
utilization.
Value
High
Average
Low
To change the port utilization interval:
Click Advanced Functions > Thresholds > Switch. See
page 28
for additional information.
To view port utilization:
Click Port > Utilization.
The Port Utilization page appears.
Figure 3-29: Port Utilization page
S
WITCH
Description
The highest percentage of data communication through a port over a period
of time (measured in seconds).
The average percentage of data communication through a port over a
period of time (measured in seconds).
The lowest percentage of data communication through a port over a period
of time (measured in seconds).
E
C
MULEX
ORPORATION
P
N
00041392-002 R
ART
UMBER
C
3: S
HAPTER
"Adjusting the Switch Thresholds" on
. B
EV
M
WITCH
ANAGEMENT
54