Hoover FloorMate SpinScrub Cleaner Manual page 6

E
Press brush assembly firmly to
p into place.
To install nozzle, make sure latches
(C) are out.
Align middle section (D) of nozzle with
opening (E) on cleaner.
Remove cardboard packing insert from
squeegee area on underside of nozzle.
O While holding nozzle in place, slide
latches inward to loci; in place.
unfold handle
Raise upper handle (A) to upright
position until it locks in place.
How to fold handle
Press upper handle release button
(B) to fold handle to storage
position.