Summary of Contents for Hoover FloorMAX Hard Floor Machine
Page 1
F l o o r M A X H a rd Floor Machine Thank you for selecting a HOOVER® product. This cleaner was inspected and packaged carefully before being shipped from the factory. If you should happen to need assistance...
,d a m age d ,left outdoors ,or dropped into water, take it to a Hoover Fa c t o ry Service Center or Au t h o r i zed Hoover Warranty Service Dealer (Depot).
Look on the list provided with the product for your local H o over Fa c t o ry Service Center or in the Yellow Pages under “Vacuum Cleaners - Household” for the neare s t Au t h o r i zed Hoover Wa r r a n t y...
1. Vacuum floor thoroughly to remove loose dirt and debris. 2. Attach brushes. 3. Prepare HOOVER Bare Floor Cleaner or other desired cleaning solution as directed on detergent container. To attach pads, insert end of fastener through opening in pad. Place pad over brush.
2. Solvent cleaning wax method Wood and other floors may be damaged by using water solution; therefore, use only those cleaners and waxes recom- mended specifically for these types of floors. The following directions are for cleaning wood or other floors with a cleaning pol- ishing solvent base liquid wax.
This lengthens the time between waxings. Before buffing, use a vacuum cleaner to remove dust and dirt and a damp cloth to remove sticky parti- cles. Stubborn spots, such as black heel marks, can be removed by rubbing gen- tly with very fine steel wool dampened with wax.
• Accumulation of wax on felt pads. • Wash and dry pads thoroughly. Accessories (Available at additional cost from Hoover Dealers (Depots), Hoover Factor y Service Centers, by filling out the enclosed order form or through The Hoover Company on-line at www.hoovercompany.com...
Possible cause Possible solution • Gritty dirt on floor. • Clean and rewax floor. If floor is waxed, only wax gets scratched. (Use vacuum cleaner to remove dirt.) Problem: Black marks Possible cause Possible solution • Scuffing from rubber heals.