Brother MFC 9420CN - Color Laser - All-in-One Quick Setup Manual page 17

8
When this screen appears, connect the
USB interface cable to your PC, and then
connect it to the machine.
(For Windows
®
(For Windows 98/98SE/Me/2000)
Brother recommends that you connect the
machine directly to your computer.
DO NOT connect the machine to a
USB port on a keyboard or a non-
powered USB hub.
®
XP)
9
Plug in the power cord and turn on the
machine.
It will take a few seconds for the installation
screen to appear.
The installation of the Brother drivers will
automatically start. The screens appear one
after another. Please wait, it will take a few
seconds for all the screens to appear.
DO NOT try to cancel any of the
screens during this installation.
0
When the On-Line Registration screen is
displayed, make your selection and follow
the on-screen instructions.
Continued ...
15