Load Paper In The Paper Tray - Brother MFC 9420CN - Color Laser - All-in-One Quick Setup Manual

Load Paper in the Paper
4
Tray
1
Pull the paper tray completely out of the
machine.
2
Place the paper tray on a flat table and lift
the front tray cover.
3
Squeeze the snap lock on the end of the
front paper guide. Slide the front paper
guide to the position for the size of paper
you are using. Release the snap lock.
Squeeze and slide the left hand side paper
guide to the paper size you are using, and
release it.
Paper
guide
4
Fan the stack of paper well to avoid paper
jams and misfeeds.
5
Put the paper in the tray with the
recommended print side face up.
Check that the paper is flat in the tray and
below the maximum paper mark.
Close the front tray cover.
6
Put the paper tray firmly back into the
machine and unfold the output paper tray
with support flap before you use the
machine.
Paper
guide
For details on supported paper
specifications, see "Acceptable paper and
other media" in Chapter 2 of the User's
Guide.
Maximum
paper mark
PAPE R
ENVE LOPE
LABE L
CARD STOC K
TRANS PAREN CY
Output paper tray
with support flap
7