Canon MP990 - PIXMA Color Inkjet Network Manual page 8

Adding Your Multifunction to Your Network
Step Seven
Make sure that the network key is correct, and
then press the OK button.
Step Eight
When the completion screen appears, press the OK button, then
press the HOME*** button (C).
***HOME button location varies depending on model.
The standby screen returns.
NOTE: If Failed to connect to the access point. appears, press the OK
button, make sure that the network key is correct, then enter it again. If a
connection still cannot be established, refer to the printed manual: Network
Setup Troubleshooting.
<< Previous Next >>
8