GE Monogram ZEU36K Owner's Manual page 17

Glass Cooktop (;leaning
Radiant Coohto/)
Normal daily
use cleaning
ONLY use CEIL_dMABRYTE= Cerlunic Cooktop
(leaner on tile glass co{}ktop. ()tiler creams may
not be as effective.
To maintain and protect tile surtime of your glass
cooktop, tol]ow these steps:
1. Beibre using tile cooktop t6r tile fil_t time,
clean it with CEILBdX,IABRYTE' Ceramic
Cooktop (]eanei: This helps protect the top
and makes cleanup easiel:
2. Daily use of CEIg_dMA BRYTE' Ceramic
Cooktop Cleaner will help kee l) tile cooktop
looldng new.
3. Shake tile cleaning cream well. Apply a tbw
drops of CER,_,IA BRYTF Ceramic Cooktop
Cleaner directly to the cooktop.
4. Use a paper towel or CEI{_dMA BRYTE=
Cleaning Pad tbr (;eramic Cooktops to clean
tile entire co{}ktop smfime.
5. Use a dry cloth or paper towel to remove all
cleaning residue. No need to rinse.
N07_: It is re*)' important that you DO NOT heat
the eoohtop until it has been e&aned thorol_@13'.
Clean your cooklepafter each
spill. Use CHtAIVlABRYTP_
Ceramic Cooktep Cleaner.
WARNING: DAMA(;E l.ss
sur_hce may occm" if you use scrub pads ()tile,"
than the pad included with your cooktop.
AVERTISSEMENT ."
Vous pouvez ENDOMMA(;ER la surthce el/
vitroc¢4ramique si vous utilisez un tampon de
r¢4curage autre que celui fourni avec votre table
de c/lissoll.
1. Allow tile cooktop to cool.
2. Spread a few drops of CEIL_MA BRYTE=
Ceramic Cool<top Cleaner oil tile entire
burned residue area.
3. Using the included CEIU_MA BRYTE'
Cleaning Pad fiw Ceralnic Cooktops, rub the
residue area, applying pressure as needed.
4. If any residue remains, repeat tile steps listed
above as needed.
5. For additional protection, after all residue
has been removed, p{}lish tile entire sur_hce
with CEIL_,IA BR'_TE' Cerlunic Cooktop
Cleaner and a paper towel.
Q_
............................... J
Usea CERAMA BRYTE ® Cleaning
Padfor Ceramic Cooktops.
Hea'uy,
burned-on
residue
1. Allow tile cooktop to cool.
2. Use a single-edge razor blade s{ raper at
approximately a 45 ° angle against tile glass
surface and scrape tile soil. It will be
necessary to apply pressure to the razor
scral)er iil order t{) i'eli/{)ve
tile residue.
3. After scraping with tile razor scraper, spread
a few drops of CEIL_d_/IA BRYTF Ceramic
Cooktop Cleaner on the entire burned residue
area. Use tile CElLed'vIA BRYTE Cleaning Pad
to remove any renmilfing residue.
4. For additional protection, after all residue
has been relnoved, polish tile entire surface
with CEIL_d_IA BP.YTE '_Ceramic Cooktop
Cleaner and a paper towel.
The CERAMA BRYTE ® Ceramic Cooktop
Scraper and all recommended supplies are
available through our Parts Center. See
instructions under "To Order Parts" section
on next page.
NOTE:Do not use a dull or nicked blade.
17