Installation Instructions - GE 197D#613PO03 Owner's Manual

Installingthe wine chiller.
Removing the Packaging
Before using the wine chiller, be sure all packing materials and tape have been removed,
including the protective film covering the control and any film protecting the cabinet.
If you are discarding an old refrigeration product, remove the doors to reduce the danger
of children being trapped inside.
Installation Guidelines
::Ji:: The wine chiller can be fl'eestanding
or can be installed under the counter,
with proper clearances.
::Ji:: Allow tile fl)lh)wing clearances fin" ease
of installation, proper air circulation
and electrical connections:
Each side llA" (38 ram)
Top 2" (51 ram)
Back 2" (51 ram)
::Ji:: D o not install tile wine chiller where
tile temperature will go beh)w 55°F
(13°(7) or above 90°F (32°C).
::Ji:: Install it on a level floor.
_: Do not install tile wine chiller where it
will be subject to direct s/mlight, heat
or i/loisttlre.
::Ji:: Do not store {)I"install this appliance
otltdooI's.
Toraise the wine chiller
Leveling Legs
Adjustable legs at tile front corners at
tile wine chiller should be set so tile
wine chiller is firmly positioned on the
flora; with a 1/8" tilt to the back to hel I)
tile door closure.
7"0 adjust the leveling legs, mrn tile legs
clockwise toraise tile wine chilleI;
counterclockwise to lower it.
4