Troubleshooting Tips - GE 197D#613PO03 Owner's Manual

Before you call for service...
Troubleshooting -tips
Save time and money/. Review the charts on the foflowing
pages first and you may not need to carl for service.
ge.com
Possible Causes What To Do
Wine chiller does not
Wine chiller is maplugged. * Push tile plug completely iuU> tile outlet.
operate and the
display
The circuit breaker is tripped/
* Replace
fl/se or reset the breaker.
is blank
the fuse is blown.
Vibration or rattling
Wine chiller
is on ml * See tile Levering Legs section.
(slight vibration uneven surface.
is normal)
Motor operates for Normal when wine chiller * Wait 12 hours fl>r the wine chiller to completely
long periods or cycles
is first plugged in. cool down.
Often occurs when large * This is normal.
amounts of wine are placed
in wine chiller.
Door left open. • Door is not sell_ch>siug. _Mways make stlre that the
door is closed alter opening.
• Check to see if a bottle is holding door open.
Hot weather or frequent • This is normal.
door
openings.
Temperature control set • See About the control and settings.
at the coldest setting.
Wine chiller is too close • See the Installation Guidelines section fi>r the
to the wall. COlTect cle;ll';inces.
Wine chiller too warm Normal when wine chiller • _ait 12 hours fl>r the wine chiller to completely
is first plugged in. cool down.
Often occurs when large • This is normal.
amounts of wine are placed
in wine chiller.
Temperature control • See
About the control
and settings.
not set cold enough.
Warm weather or frequent • Set the temperattu'e ('outrol one step ('older.
door openings.
See About the control and settings.
Wine chiller is too close • See the
InstallationGuidelines
section fin" the
to the wall. (OITe(t ('le;ll';ln(-e_.
Door left open. • Door is not sell:closing. _Mwa)'s make stlre that the
door is closed after opening.
• Check to see if a bottle is holding door open.
• When the power came back on, the wine chiller
retttrued to the defatdt setting, which
is RED WINE,
Reset the control to the desired setting.
If the temperature setting is
not showing what you last
selected, a power outage
may have occurred.
//