Table of Contents
Advertisement
Camand cleaning,
ge.com
Cleaning the Outside
IMPORTANT'. Unplug the wine chiller before
cleaning.
Keep the outside clean. The
cabinet
can
be washed
with mild soap and water.
Rinse
thoroughly
with clear
water.
Never
use abrasive
scouring
powders.
Use a glass cleaner
or mild soap and
water
and a sott cloth
to clean
the glass door.
Do not use any abrasive
powders.
_]i)e
the control
panel
with a damp cloth.
Dry thoroughly:
Do not use cleaning
sprays,
large
amotmts
of soap and water;
abrasives
or sharp
objects
on the panel--
they can damage
it. Some
paper
towels
can also scratch
the control
panel.
Do not wipe the wine ch///er with a soi/ed
dishcloth or towel Thesemay leave a residue that
can erode the paint. Do not use scouring pads,
powdered cleaners, bleach or cleaners containing
bleach because these products can scratch and
weaken the paint finish.
Stainless steel. Regularly
clean
and polish
tl_e stainless
steel areas
(on some
models)
with a commercially
awfilable
stainless
steel cleaner
such as Slainle,ss Sled ,Vlag'i__
to preserve
and protect
the fine finish.
Slainle,_s Sled Mag'i_ ¢_is available
through
GE Parts and Accessories,
800.626.2002,
or ge.com.
Order
part
nmnber
_SX10X15.
Do not use appliance
wax or polish
on the
stainless
steel.
Protect the paint finish. The
finish
on
the outside
of the wine chiller
is a
high-quality,
baked-on
paint
finish.
With
proper
care, it will stay new-looking
and
rust-fi'ee
for years. Apply a coat of
kitchen/appliance
wax when
the wine
chiller
is ne_.
and
then
at least twice
a veaI
k
Cleaning the Inside
IMPORTANT'. Unplug the wine chiller before
cleaning.
To clean
the inner
liner and racks, use
a warm
water and
baking
soda solution--
al)out
one tablespoon
(15 ml) of baking
soda to a quart
(1 liter)
of water. This
both
cleans
and neutralizes
odors.
Rinse
and wipe dry.
The vinyl door
gasket
may be cleaned
with mild soap and
water
or a baking
soda solution.
Rinse well.
Do not use detergents, scouring powders,
spray cleaners or other harsh chemicals to
clean the interior.
Defrosting
Defrost whenever frost on the inside surfaces
of the storage area becomes 1/8" (3 ram) thic/c
Never use a heater of any kind, scraper or
sharp instrument to remove frost as it may
damage the wine chiller.
To defrost, unplug
the wine chiller.
Remove
the contents
and wipe inside
surfaces
and racks with a clean
towel.
If fl'ost does not come
off easily,
allow the fix)st to melt
somewhat
and wipe off.
After defrosting, make
sure inside
surtaces
are dry; then
return
the contents
to the
wine
chiller
and set the temperature
control
to the desired
setting.
Advertisement
Table of Contents
