Download  Print this page

Faucet Electronics - Kenmore 625.384610 Owner's Manual

Two-stage drinking water system
Hide thumbs

Advertisement

FAUCET ELECTRONICS
Inside the faucet
base is a battery
operated
6 month
timer.
See Figure 14.
An amber
LED indicator
is also located
in the front of the
faucet
base.
This LED will flash continuously
after 6
months has passed.
This indicates
that it is time to
replace
the battery
and filter cartridges.
CHANGE
BATTERY
To change
(or install) the battery,
complete
the following
steps.
1. Loosen the screw on the right side of the faucet
base
See Figure 14.
2. Press the battery
housing upwards
from the front
faucet
base until it releases from the faucet
base.
See
Figure 14.
3. Replace
(or install) the battery
(Maxell
CR 2032 or
equivalent).
Place battery
into the holder with the pos-
itive (+) side facing
the back of the holder.
4. When the battery
is first replaced
it will flash six times
and turn off.
This indicates
the battery
is fully
charged.
After the six flashes, the timer enters the 6
month time cycle.
NOTE:
If the LED repeatedly
flashes just two times, it is
not a fully charged
battery
and will need to be replaced.
5. Re-install
the timer housing and firmly
tighten
the
mounting
screw.
See Figure 14.
battery
housing
batter%
negative (-)
____L_
side facing
/
_1
the front___
screw
faucet _
L_
_'
base
__
Figure
14
Questions?
Call The I<enmore Water
Line 1-800-426-9345
or visit I<enmoreWater.com
9

Advertisement

loading

  Related Manuals for Kenmore 625.384610