Kenmore 625.384610 Owner's Manual page 3

Unpack and Check Shipment ...................................................................... 4
Plan Your Installation ............................................................................. 5
Step I-Install Supply Water Fitting .................................................................. 6
Step 2-Install Filtered Water Faucet ................................................................. 7
Step 3-Connect Tubes ............................................................................. 8
Maintenance ................................................................................. 9-11
Specifications .................................................................................. 12
Troubleshooting ................................................................................. 12
Exploded View & Parts List ..................................................................... 14-15
• Read all steps and guides carefully before installing
and using your Two-Stage Drinking Water Filter.
Follow all steps exactly to correctly install. Reading
this manual will also help you to get all the benefits
from the Two-Stage Drinking Water Filter.
• Do not attempt to use this product to make safe drink-
ing water from non-potable water sources. Do not use
the system on microbiologically unsafe water, or water
of unknown quality without adequate disinfection
before or after the system.
• Check with your local public works department for
plumbing and sanitation codes. You must follow their
guides as you install the system. Follow your local
codes if they differ with guides in this manual. In
Massachusetts, plumbing codes of Massachusetts shall
be adhered to. Consult with a licensed plumber.
• The Two-Stage Drinking Water Filter works on water
pressures of 30 psi (minimum) to 100 psi (maximum).
If your house water pressure is over the maximum,
install a pressure reducing valve in the water supply
pipe to the Two-Stage Drinking Water Filter.
• Do not install the Two-Stage Drinking Water Filter out-
side, or in extreme hot or cold temperatures.
Temperature of the water supply to the Two-Stage
Drinking Water Filter must be between 40°F and
100°F. Do not install on hot water.
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com
3