Connecting With A Power Supply - Epson 8100 Operating Manual

Setting up

Connecting with a power supply

Before connection, confirm that the power
outlet is suitable for this projector and the
power cord.
Then follow the procedure below for
connection.
1.
Insert the end of the power cord with the
socket into the AC inlet of the projector.
2.
Plug the other end of the power cord into
a power outlet.
WARNING
electric shock or a fire.
• Do not handle the power cord with the wet hand.
• Use this product with only the type of power supply indicated on the projector.
• Use a power outlet that is close to the projector and easily accessible.
• Connect firmly the power cord not to result in loose connection. Do not use a
loose or unsound power outlet.
• Do not overload the outlet, since overloading can result in a risk of fire or
electric shock.
• Use only the power cord contained in this product unless it is damaged. If it is
damaged, consult your dealer to get new one. Do not modify the power cord.

►Be careful of operation for a power supply not to cause an
AC Inlet
Power cord
(with the socket)