Epson 8100 Operating Manual page 56

NETWORK Menu
NETWORK Menu (continued)
Item
SETUP
(continued)
(continued on next page)
56
Use the ▲/▼/◄/► buttons to
enter the IP ADDRESS. This
function can only be used when
DHCP is set to OFF.
IP
ADDRESS
• The IP ADDRESS is the number that identifies this
projector on the network. You cannot have two devices
with the same IP ADDRESS on the same network.
• The IP ADDRESS "0.0.0.0" is prohibited.
Use the ▲/▼/◄/► buttons to
enter the same SUBNET MASK
used by your PC. This function
SUBNET
can only be used when DHCP is
MASK
set to OFF.
• The SUBNET MASK "0.0.0.0" is prohibited.
Use the ▲/▼/◄/► buttons to
enter the DEFAULT GATEWAY
(a node on a computer network
DEFAULT
that serves as an access point to
GATEWAY
another network) address.
This function can only be used when DHCP is set to
OFF.
Use the ▲/▼/◄/► buttons to
input the DNS SERVER address.
DNS
The DNS SERVER is a system
SERVER
to control domain names and IP
addresses on the Network.
Use the ▲/▼ buttons to enter the
TIME DIFFERENCE.
Set the same TIME DIFFERENCE
TIME
as the one set on your PC. If
DIFFERENCE unsure, consult your IT manager.
Use the ◄ button to return to
the menu after setting the TIME
DIFFERENCE.
Use the ▲/▼/◄/► buttons to
enter the Year (last two digits),
Month, Date, Hour and Minute.
DATE
AND
• The projector will override this setting and retrieve
TIME
DATE AND TIME information from the Time server
when SNTP is enabled. ( Date/Time Settings of the
User's Manual - Network Guide)
Description