Roamabout Pigtail Connection - Enterasys RoamAbout Site Preparation And Installation Manual

RoamAbout Pigtail Connection

RoamAbout Pigtail Connection
The RoamAbout Pigtail Connection is a proprietary cable used to connect the RoamAbout
PC Card to a RoamAbout outdoor antenna system.
One end of the cable has a proprietary connector which is connected to the RoamAbout PC
Card. The N-Type connector at the opposite end of the cable matches the polarity of the N-
connectors of the other components that are part of your outdoor antenna cabling system,
subject to the country where the RoamAbout Pigtail Connection was purchased.
Table A-4: Pigtail Connection Specifications
Mechanical
Length
Connectors
• FCC Countries
• ETSI Countries
• France
• Japan
• Asia Pacific
Operating Temperature
Electrical
Frequency Range
Insertion Loss
A-5 Specifications
50 cm (19.5 in)
Reverse Polarity-N (Female)
Standard-N (Male)
Standard-N (Male)
Standard-N (Male)
Standard-N (Male)
-40°C to +85°C (-40°F to +185°F)
800-2500 MHz
0.9 dB