Overview Of Connecting Cables To The Access Point - Enterasys RoamAbout Site Preparation And Installation Manual

Overview of Connecting Cables to the Access Point

Overview of Connecting Cables to the Access Point
Before cabling the Access Point, you should install the Access Point to a wall or ceiling.
For detailed hardware installation procedures, see the RoamAbout Access Point 2000
Hardware Installation Guide.
listed in the following procedure.
1. Insert the PC Card into the Access Point. Refer to the RoamAbout 802.11 PC Card
Installation Guide for Regulatory and Installation information before installing the PC
Card.
Figure 2-1: Access Point 2000 Installation Overview
2-2 Access Point Placement and Configuration
Figure 2-1 provides you with an illustration of the steps
T U
V