Vehicle-Mount Antenna - Enterasys RoamAbout Site Preparation And Installation Manual

Vehicle-Mount Antenna

The RoamAbout vehicle-mount antenna can be mounted on vehicles, such as fork-lift
trucks, that need continuous access to networked data whether inside or outside of the
building. The following table provides the specifications for the vehicle-mount antenna.
Table A-3: Vehicle-Mount Antenna Specifications
Mechanical
Cable Size
Insertion Loss @ 2.4 GHz
Connectors
FCC Countries
ETSI Countries
France
Japan
Asia Pacific
Electrical
Frequency Range
VSWR (Voltage Standing Wave Ratio) 1.5:1
Nominal Impedance
Gain
Half-Power Beamwidth
Polarization
Power Handling
Antenna Environment
Operating Temperature
Relative Humidity Range
Wind/survival (mph)
Wind rating
Wind load
1
104 km/h (65 mph) with 1.25 cm (0.5 in) ice.
250 cm (8 feet) Pigtail
3.3dB
Reverse Polarity-N (Male)
Standard-N (Female)
Standard-N (Female)
Standard-N (Female)
Standard-N (Female)
2400-2438 MHz
50 Ohms
5 dBi
NA
Vertical
100 Watts
- 40°C (-40°F) to +60°C (140°F)
0-100%
1
194 km/h (120 mph)
129 km/h (80 mph)
202 km/h (125 mph)
Vehicle-Mount Antenna
Specifications A-4