Enterasys RoamAbout Site Preparation And Installation Manual page 33

Figure 2-2: RoamAbout Access Point Manager
10. If this is a Point-to-Multipoint configuration and the selected Access Point is the
designated central Access Point, perform the following:
a) Select LAN-to-LAN Multipoint in the Bridge Mode field.
You must purchase a license with a valid activation key to enable Multipoint
NOTE
Bridge Mode. Contact your Enterasys Networks Representative.
b) Enter the Multipoint activation key.
c) Click on the LAN-to-LAN Multipoint Properties button in the Wireless
Parameters dialog box.
Overview of the Access Point Configuration
Access Point Placement and Configuration 2-5